![]() Pour all of the resin and hardener into a clean mixing vessel. If primer is absorbed by a porous substrate, re-prime before applying mortar.Įpoxy Putty has 3 pack sizes: TP75 – 3kg, 3 containers TP71 – 10kg, 3 containers TP72 – 32kg, 4 containersįor each pack size all containers must be used to complete the mix. ![]() Apply a thin coat of mixed primer to the work area using a stiff bristle bush. Using Bondcoat UF, pour all of the contents of the hardener bottle into the tub containing the resin base and mix until homogeneous. For porous or very dense surfaces priming with Bondcoat UF may be required. Corroded steel should be cleaned back to bright metal.įor the majority of works carried out using Epoxy Putty no priming is necessary. Steel surfaces should be free of mill scale and rust. Concrete surfaces should be roughened to produce a mechanical key. Remove laitance and all loose material including dust, oil and grease to achieve a sound substrate. This is externally accredited by UK CARES to BS EN ISO 9001:2015, BS EN ISO 14001:2015, BS ISO 45001:2018 and BES 6001.Įpoxy Putty has been tested in accordance with the relevant parts of the following standard: Parex Limited has an integrated business management system. The product must be stored, handled and used strictly in accordance with the manufacturer’s instructions. Patching, repairs and support shall be carried out using Epoxy Putty as manufactured by Parex Ltd. Repair of concrete beams, columns, walls and floors in areas where a smooth finish is required.īedding applications to support precast concrete units, steel stanchions, bridge bearings, wooden blocks and baulks, anti- vibration units and other areas where strength of the highest order is required. The mortar is stable to freezing and thawing. Parex Epoxy Putty is resistant to a wide range of chemicals including petroleum products. The mortar can be used to give support to concrete arises and will act as a high strength support under precast concrete and steel units. Parex Epoxy Putty is easy to place using hand tools giving concrete bedding and repairs of the highest mechanical properties. The grading of the filling system enables application thicknesses of 25mm down to a feather edge.įor very absorbent or very dense surfaces the working area may need to be primed using Bondcoat UF giving excellent adhesion to most construction materials. The three component product consists of a resin base, hardener and a bag of specially graded fillers. Parex Epoxy Putty is an epoxy resin based mortar suitable for placing using hand tools.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |